Siemens Combustion Controls LMV5 Components

LMV5-brochure

LMV5-quickstartguide

Control & Software Connection

LMV51.040C1 Control unit 110 V, 50-60 Hz.
LMV51.140C1 Control unit with integrated PID temp/pres control, 110 V, 50-60 Hz.
LMV52.240B1 Control unit with, PID control, 6 actuator, VFD and O2 functions, 110 V 50-60 Hz
LMV52.440B1 Control unit with, PID control, 6 actuator, VFD and high performance O2 functions
ACS450 PC-tool software for LMV5, Programming, commissioning, diagnostics, trending, history

Display

AZL52.40B1 Programming display with MODBUS interface for LMV52 & LMV51 controls

Flame Sensors

QRI2A2.B180B IR Flame detector, forward viewing. AGG2.110 & AGG2.120 required for mounting
QRI2B2.B180B IR Flame detector, side viewing European style, (bracket needed to mount, contact sales rep)
AGG2.110 3/4″ threaded holder for QRI2A2…, frontal viewing, insulated with protective lens
AGG90.U 3/4″ threaded holder for QRI2B2…, side viewing, insulated with protective lens
AGG2.120 Conduit connection adapter for QRI, 3/4″ NPSM thread.
QRA75.A17 Self check UV scanner, side viewing (AGM23 bracket and AGM23 cable required for installing)
AGM23U Connection cable for QRA75 UV sensor, 12′
AGG16.U Forward viewing mounting bracket for QRA75 UV sensor

Drive Motors

SQM45.295A9 Actuator, 27 in-lb torque, running time 10-120s, face mounting, 10 mm flat shaft
SQM48.497A9 Actuator, 180 in-lb torque, running time 30-120s, face mounting, 14 mm keyed shaft
SQM48.697A9 Actuator, 320 in-lb torque, running time 60-120s, face mounting, 14 mm keyed shaft
SQM91.391A9 Actuator, 530 in-lb torque, running time 30-120s, face mounting, 25 mm keyed shaft
74662010040 1/2″ Conduit adapter for SQM 4.. actuators. M16 to 1/2″ conduit
7466200470 Cord Grip for SQM4.. actuators. M16 to 1.5 kpl AGG5.643 Canbus cord grip

Installation Accessories

AGG5.110 Can Bus connector, 90 deg. Offset with strain relief
AGG5.210 Power supply for LMV51 Can Bus circuit, 120 Vac primary: 12-0-12 Vac secondary
AGG5.310 Rotational sensor and mounting kit, required for LMV52 VFD apps.
ADPT-6F 6 finger speedwheel, replaces 3-finger speedwheel supplied with AGG5.310 for higher turndown
AGG5.635 9′ pre-assembled Can Bus connection cable to connect the LMV5 to the AZL
AGG5.720 Standard connection plug set for LMV5 for three motor system layout
AGG5.721 Extended connection plug set for additional motor, transformer or VFD system layout

SCC Bracket Kits

BR-SQM3345-LUC Bracket Kit For SQM33 or SQM45 to Lucoma Damper
BR-SQM48-LUC Bracket Kit For SQM48 to Lucoma Damper
BR-AS2C1-183-7-03 Cleaver-Brooks Air Damper bracket kit for retrofit, SQM4/5, 4.5″
BR-45CBOIL Bearing Block Retrofit kit for SQM45.295A9 to Cleaver-Brooks Fuel Oil Controller
BR-48CBOIL Bearing Block Retrofit kit for SQM48 to Cleaver-Brooks Fuel Oil Controller

O2 Trim Accessories

PLL52.110A100 Oxygen Trim Electronic Module
AGO20.001A Flue Gas Collector, 7-1/4″ length for stack diameters up to 16″
AGO20.002A Flue Gas Collector, 10-1/2″ length for stack diameters larger than 16″
QGO20.000D17 Oxygen Sensor, 110V 50-60Hz, 150W
AGO20.002SDS-KT Weldless Option Flue Gas Collector Kit for Small Diameter Stacks, 14″ to 18″diameters.
AGO20.002LDS-KT Weldless Option Flue Gas Collector Kit for Large Diameter Stacks, 20″ to 30″diameters.
QGO20.000D17 Oxygen Sensor, 110V 50-60Hz, 150W

Can Bus Wire

AGG5.643 Can Bus Cable, 500′ roll